How to calibrate your hoverboard: 1. Before calibrating the hoverboard, please be sure you will follow the steps below carefully 2. Make sure the balance scooter is powered off 3. Put the scooter on a flat and smooth ground, ensuring both pedals are flat and parallel to the ground (This is very important) 4. Press and hold the power button until indicators on both sides are started to flash 5. After indicators flash for 8 times, turn off the scooter 6. Turn on the scooter after several seconds, then you can ride it 7. If the scooter does not reset, please try the above steps again after 10 minutes Note: Please do not press the power button frequently, the circuit board may be damaged by doing this
Be the first to comment